How To Create A Distressed Paint Effect On Wood

Posted on

How To Create A Distressed Paint Effect On Wood. Leave it to dry and after, generously apply paint to the area. Try using a combination of these methods, and use both a wet cloth and a sanding sponge to create the look you want.

The Easiest Way To Heavily Distress Furniture - Lovely Etc Distressed Furniture Painting Distressed Wood Furniture Distressed Furniture Diy
The Easiest Way To Heavily Distress Furniture – Lovely Etc Distressed Furniture Painting Distressed Wood Furniture Distressed Furniture Diy from www.pinterest.com

Steel wool (grade 2) gloves; If the wood has been painted over previously, sand the wood lightly so that the new paint (later) to adhere properly. Paint the piece and let it dry for a bit, then rinse with water and wipe the surface gently with a cloth.

Dark wood stain (i used walnut) cotton white latex paint;

Leave it to dry and after, generously apply paint to the area. Paint the piece and let it dry for a bit, then rinse with water and wipe the surface gently with a cloth. These are the steps with a simple explanation as to how to distress wood painted furniture:

Multiple layers of paint in assorted colors is the way to go if you feel like sanding some sections to create a worn distressed look.

The top paint coat is applied while the medium is still wet. Try using a combination of these methods, and use both a wet cloth and a sanding sponge to create the look you want. Wrap your sandpaper around a sand block.

My oldest thought this was the coolest part of the entire diy shabby distressed paint finish project!

You may notice in the photo below that the paint didn’t want to adhere over the edges where the vaseline was applied. For a start, it’s important to remove any residues if the wood you use has been painted or varnished before. If you're using a single color on a piece of furniture and want to expose the original wood layer, henry says dry distressing is the way to go.

Wear safety glasses before you begin, and fill an old pillowcase with nuts and bolts, and use this to pound areas of the wood to creates dents.

To go along with additive methods of distressing, like making divots and staining, you can also distress wood by subtractive methods, like sanding. This causes the wood to absorb more paint in some areas. Just to give the wood more character.

Dab dry to make sure your sandpaper is damp but not soaked.

Add an antique wash to your wall for a distressed look. Dip a large paintbrush halfway in the paint that you have selected to go over the old paint. Lighter paint colors work best.

Leave a Reply