How To Make Wood Look Distressed With Spray Paint. (unless you don’t care if you spray paint your grass!) spray the chalk spray paint in even, light coats. I use a little chip brush or sponge brush to stain all of the raw wood.
It’s a method similar to the paper one. (unless you don’t care if you spray paint your grass!) spray the chalk spray paint in even, light coats. I used stain that i had on hand that was close to the same color as the original wood of the gun rack and some white paint that i had on hand.
Your paint will not adhere where you’ve applied the vaseline, so make sure to use it judiciously!
What paint to use to look distressed? To go along with additive methods of distressing, like making divots and staining, you can also distress wood by subtractive methods, like sanding. Also, this technique may not be suitable for surfaces.
If you're thinking about getting into s.
Start by giving it a light sand allover using 60 grit paper. Apply light pressure to sand away paint along edges. Apply one coat of paint to your piece (in this case we chose bliss) and let it dry completely.
Steel wool (grade 2) gloves;
This will require more strokes and does take some time but it is what will give you the appearance of worn, weathered painted wood you are after. This will help the wood to maintain its distressed appearance. Allow it to dry for at least an hour.
If you’re painting a previously painted surface, then it’s better to give the paint a good chance to cure.
Brush on the water/paint mixture in the direction of the wood grain. Apply wax(candle) to places you want the wood/base paint color to show. These are the steps with a simple explanation as to how to distress wood painted furniture:
Dark wood stain (i used walnut) cotton white latex paint;
Wrap your sandpaper around a sand block. If the piece is already painted, sanding through the paint in some areas of natural wear will contribute to the distressed look once finished. How to create distressed wood look with dry brush painting technique