7142020 Before the nickel plating will accept paint it requires pre-treatment with a special acidic primer formulated with the ability to etch durable metallic surfaces. Prepare the brass plating for its new finish by treating it with the appropriate base.
Get Instant Quality Info at iZito Now.
How to paint brass plated metal. Apply a galvanized metal-etching spray primer. While a brass-tone paint Metallic Spray Paint gilded brass affil. Rinse the brass plating with wet rags.
8302017 Because brass plating is fragile the scuffing process must be done by hand — an electric sander or grinder will chip the plating resulting in an uneven surface. Spray paint the metal with paint made for metal items in the color of your choice. Spray one light even coat of paint over the metal and allow it to dry completely.
Metals tend to show brush strokes so its best to opt for spray paint. Wait four hours for the metal to dry. Scrub the metal with mineral spirits affil.
8202012 Dust dirt or grime will make the spray paint bubble so make sure to wipe them down very well and make sure they are completely dry. 732008 The brass electroplating is not paint Michael it is a plating which you dont do yourself but is done by a plating shop. Cover everything within 2 feet of the brass plating using masking paper and a low-tack tape.
Apply a coat of Rust-Oleum Clean Metal Primer affil. 8302017 Coat the nickel plating with a galvanized metal-etching spray primer. Use spray paint in dark reddish bronze to transform a brass or gold faucet giving it the look of oil-rubbed bronze in a polished or satin finish.
Link to infoproduct on Amazon. Once youve properly conditioned the nickel-plated metal it can be painted. Safety How YouTube works Test new features Press Copyright Contact us Creators.
Link to infoproduct on Amazon flammable to remove wax and polish. Allow the metal to dry completely before using it. Then cover the light sockets.
Maintain an 8-inch distance between the nickel plating and the spray nozzle at all times. Link to infoproduct at Rockler to roughen and degloss the surface. Get Instant Quality Info at iZito Now.
I usually stuff paper towels or old newspaper into the socket and then tape around the switch or anything else that I dont want painted. Sand the metal thoroughly with 100 grit sandpaper affil. Spread thick canvas coverings on the ground beneath the metal.
Link to infoproduct on Amazon will not really match the brass electroplated finish it will hopefully be less conspicuous than the black spots. Dry it with towels. Do not overspray the item or the paint will drip.
With cabinets or a vanity in espresso a faucet. Ad Get Metal Plated. If the color is not dark enough spray a second light coat.