Since bubbles may form let fifteen minutes pass before you begin using the stain. Re-sanding roughs up the finish just enough so that the second coat of stain can penetrate.
Dip your paint brush in the stain and swipe a thin layer onto the surface of your piece to be finished.
How to stain wood that has been painted. In order to allow the paint to grip to the surface of your wood you should sand away the gloss. How to Apply Stain Over Paint Easy DIY Woodworking Finishing Ideas Instead of repainting the entire piece you might consider adding stain over the paint. Apply Stain to the Paint.
You can control the shading to a point by how long you leave the stain on the wood before wiping up the excess. Sand away light scratches with fine. Check the surface for holes and scratches or other imperfections and patch any holes with wood putty using a putty knife.
Wipe off residual sandpaper dust and dry off the object. Shake and open your oil-based stain. Applying oil-based or shellac primer is a required step when painting over stained wood.
Apply the latex paint with Oil Bond additive to the wood surface using a brush roller or spray. You can stain over a stained piece by using a gel stain. If you do not want to sand your stained wood you can use a paint deglosser or liquid sandpaper instead.
Wait a day or two and wipe the stripper away with either a damp rag or paint scraper. Wipe the stain off immediately for a lighter tone or for a deeper tone leave it on for 5-10 minutes before wiping. Use latex primer and paint when painting over a water-based wood stain.
You apply a base coat in a paint color that looks like pine and then one or two coats of the gel stain from one side of the furniture piece to the other. Immediately after making the brush stroke swipe the stain with your rag. To stain over a painted deck you will first have to remove any current paint from your deck either by using a deck stripper or by sanding the surfaces of your deck boards.
You do not need to sand away the stain just rough up the glossy surface. Once the paint has been removed you can then stain the deck. Try to work in long even strokes and.
Then commence with painting the base. Spread a layer of paint stripper over the painted wood using the proper application instructions. Applications include wood that has been previously painted or has a polyurethane finish.
Scrape as much paint as you can from the surface using a combination scraping chemical strippers and sanding to reveal the bare wood or consider leaving a bit of paint behind to give the wood a unique patina. Youll know when the paint is ready to be removed as it will soften. It requires only very light sanding and no stripping.
As with paint stain carries pigments and must be thoroughly mixed. Begin by using your scraper to remove the paint from a small section to determine the best solution. Use a dry cloth to absorb any excess.
Once the final coat of stain is dry go back over with the 220 grit sandpaper and apply Dark Wax or polyurethane to protect the finish. Youll need to allow about two days of. Hold a paint brush in one hand and a rag in the other.
Stain is oil-based so latex primers wont adhere to it properly. Despite the extra effort it will take you can successfully transition your deck from painted to stained. Stir the stain carefully with a clean wooden stirring stick.
Then mix 16 ounces of Oil Bond per gallon of latex paint. Wipe down the dust and stain again. Paint adheres well over water-based stain so after completing the prep steps outlined above apply a water-based latex.
Dip a washcloth in water and wipe off any dust or grit left behind by the sandpaper. Some people love to use Glidden Gripper primer instead of sanding. Lightly sanding down the edges to expose the wood then staining OVER the paint would add depth and interest.
Never again worry about durability or texture. The base coat shows through slightly giving the illusion of wood grain.