Tooth brushes work really well to spread around the magic paint peeling goop just dont use it afterward to brush your teeth. The best bet with aluminum is to send the frame out to a shop which specializes in stripping paint off aluminum mostly using chemicals.
Find out which method is best.
How to strip paint from bike. The Ultimate Paint and Body Guide Part 2- How To Strip Paint Its time to reach beneith the surface to see what is really hiding under that old paint on your ride. To remove paint and decals from a carbon frame you have to hand sand the entire frame. I used enamel that they recommended they mixed it and put it in spray cans for me.
Ive been stripping two old doors from my childhood home. We reached out to Carbo-lift given the nature of our business about their product but never heard anything back. You dont need to make sure it soaks in or anything but just layer it on top.
You dont just wipe it off and get a raw finish. They told me to use a scotch bright pad and clean up the existing paint really well since it was good paint. Titanium is often left unfinished as it does not rust.
Cling wrap keeps all the solvents and special magical chemicals in the magicsauce right up in the paints grill. Removing paint from a bike frame uncover the aluminium with chemicals and sanding paper removing paint from a bike frame uncover the aluminium with chemicals and sanding paper removing paint from a bike frame uncover the aluminium with chemicals and sanding paper removing paint from a bike frame uncover the aluminium with chemicals and sanding. NEW SITE IS UP.
Most auto part stores will carry this. Once the bike is clean fill a small container with the paint remover. Take your time with the paint spray light coats after the color let it dry and then apply.
No need to strip the entire frame feather edge the damaged areas with 150 grit sandpaper then 320 grit the whole thing spot prime the bare metal areas with two light coats of epoxy primer then use 500 grit on the complete frame all done the trick to painting is keep it clean. At one end of the spectrum you could simply strip all the parts off spend time with a pot of paint stripper and emery cloth then repaint by brush in whatever Hammerite colour happens to take your. If you want to disguise the make of your bike try masking the surrounding area and use auto body touch up spray paint.
The main sections of paint will come off very easily it can actually be quit. Titanium is softer than steel and any paint should be removed using chemical paint remover as with aluminum. Its been hard slog I must say until I recalled this handy hint on how to strip paint.
Do one coat of this all over the frame. The house was built in the 1920s so there was about 85 years of paint and varnish on them. Removing old paint from your bicycle frame is a great way to change the look of your bike or as a first step in restoring your bike with fresh paint.
Then painting is not an issue. It certainly takes some time. I painted a carbon fork recently I got the paint from a good automotive paint store.
The first layer that is. This little trick of how to strip paint may be just the thing to put a smile on your face. Just try to get as close a color as possible OR tape up a cool pattern and get a contrasting color.
One coat of paint stripper x 2 minutes and the paint just falls off. Use the brush to spread the paint remover over the frame. Then leave the paint remover on the bike for 5-10 minutes and paint should begin to peel off a tiny bit.
Nitromors a paint brush a couple of toothbrushes a load of newspaper some safety specsgloves and a damp cloth.